Choosing Print Layout Options On A Macintosh - Epson Photo 700 User Manual

Note:
If you choose Black for
your Ink setting, the
watermark is printed in
gray, even if you select a
color for your watermark.
If your monitor displays
only 16 colors, the
Intensity adjustments are
not shown in the Layout
graphic. If you choose the
No Halftoning setting, the
Intensity setting does not
determine how your
watermark is printed.
5. Now select the way you want the watermark to appear by
choosing the following options. The Layout graphic
changes to reflect all the settings you choose.
selects where you want the watermark to
Position
appear on your page:
Bottom-Left
adjusts the size of the watermark, either larger or
Size
smaller, as you move the slide bar.
lets you choose a color for your predefined
Color
watermark:
or . You cannot select a color for custom
Yellow
watermarks; they are the same color as the original
bitmap.
sets the lightness or darkness of the
Intensity
watermark (from 5% to 100%) based on where you
move the slide bar.
6. Click to accept your Watermark Settings.
OK
7. If you're finished changing Layout options, click
close the Layout dialog box.
Choosing Print Layout Options on a
Macintosh
Follow the steps in these sections to use options in the Layout
dialog box:
Using the Fit to Page option
Using multiple print layouts and page frames
Adding a watermark
2-27
,
Center Top-Left
, or
Bottom-Right
, , ,
Red Black Blue Aqua
Custom Printing
, ,
Top-Right
.
, ,
Lime Fuchsia
to
OK
,