Note:
You can access the
default Windows NT
printer software settings
only if you have the
appropriate network
access privileges, such
as Administrator or
Power User.
Setting Default Options in Windows 95
or Windows NT 4.0
Follow these steps:
1. Click
, point to
Start
2. Right-click the
EPSON Stylus Photo 700
window.
Printers
3. Select
Properties
Then click the
Main
You see the printer settings dialog box, as shown on
page 1-2. Any changes you make will become the default
settings for all your applications and documents. Click
when finished.
Setting Default Options in Windows 3.1
Follow these steps:
1. Double-click the
2. Double-click the
3. Select
EPSON Stylus Photo 700
printers and click
box, similar to the one shown on page 1-2.
4. Make any changes you want to become the default settings
for all your applications and documents, and click
when you are finished.
1-5
, and then select
Settings
(
Document Defaults
tab.
icon in the Main group.
Control Panel
icon.
Printers
from the list of installed
. You see the printer settings dialog
Setup
Basic Printing
.
Printers
icon in the
in Windows NT).
OK
OK