Epson Photo 700 User Manual page 116

You see a spooling error message (Windows)
Possible cause
Spooling error messages or
very slow printing may be
caused by temporary files.
Your hard drive is too full.
Your computer doesn't
have enough memory for
the file you're printing.
You see a type 11 or memory error message (Macintosh)
Possible cause
You may need to increase
the memory allocation for
your application, EPSON
Monitor3, or both.
Your system doesn't have
enough RAM.
Your printer switches to the modem port or won't confirm on the printer
port (Macintosh)
Possible cause
Your system has extension
conflicts.
You're using an AppleTalk
cable.
You are unable to use EPSON Monitor3 (Macintosh)
Possible cause
EPSON Monitor3 is not
installed or is corrupted.
Solution
Change the Spool Manager default spool directory, following the
instructions on page 4-12.
Delete unnecessary files to make room on the drive.
Try one of the following:
Reduce the resolution of your image.
Select fewer colors or a lower resolution for your monitor.
Add more memory to your computer.
Solution
Choose Get Info from the File menu when your application is
active or EPSON Monitor3 is selected and increase the memory
requirements. See page 4-14 for more information. If this doesn't
work, turn off background printing (you won't be able to use
EPSON Monitor3).
If your system has virtual memory, use this to simulate having
more RAM. If this doesn't work, free up more space on your hard
drive by deleting unwanted files. See your computer
documentation for details.
Solution
Make sure AppleTalk
serial printer to the printer port. Close and reopen the Chooser;
then select the SP 700 icon. Close the Chooser.
Make sure you're using a standard Apple System Peripheral-8
cable, and it's securely connected at both ends.
Solution
Install (or reinstall) EPSON Monitor3 and make sure background
printing is turned on.
6-13
®
is inactive. In the Chooser, set any Apple
Troubleshooting