Customize The Screen Tracking Area - Intergraph ImageStation ZIII Installation And Use Manual

10
When using the stereoscopic display subsystem, combat the effects of stress on your eyes by
periodically taking a break. Stand up, stretch, and look away at something distant to change
focal depth and to relax your eyes.
NOTE For information on battery installation in the infrared glasses, refer to the documents delivered
with the glasses.

Customize the Screen Tracking Area

Customizing defines a small rectangle on the digitizer's surface to represent the entire screen
tracking area. The digitizer ships with the screen tracking area defined as the entire active
tracking area. This requires a user to move the two-handed controller across the entire length
of the digitizer's active tracking area to move the on-screen pointer from one corner of the
screen to the other.
NOTE The active tracking area is the section of the digitizer in which the two-handed controller
operates. It is identified on the digitizer surface as a rectangular outline on the mylar cover.
To select on-screen icons with less effort than using the two-handed controller, you can
customize the screen tracking area.
To customize the screen tracking area:
1. From the Windows NT Start menu, go to Programs/Altek/Wintab Control Panel.
2. Double click the Customization icon.
3. Clear the Whole Tablet check box.
4. Place a data point in the grey rectangle of the Tracking Area menu.
5. Place a data point on the lower left corner of the desired tracking area in the digitizer
active tracking area.
6. Place a data point on the upper right corner of the desired tracking area in the digitizer
active tracking area.
7. Select OK to complete the operation.