Customize The Screen Tracking Area - Intergraph ImageStation ZII Installation And Use Manual

10

Customize the Screen Tracking Area

Customizing defines a small rectangle on the digitizer's surface to represent the entire screen tracking
area. The digitizer ships with the screen tracking area defined as the entire active tracking area.
This requires a user to move the two-handed controller across the entire length of the digitizer's
active tracking area to move the on-screen pointer from one corner of the screen to the other.
NOTE The active tracking area is the section of the digitizer in which the two-handed controller operates. It is
identified on the digitizer surface as a rectangular outline on the mylar cover.
To select on-screen icons with less effort than using the two-handed controller, you can customize the
screen tracking area.
To customize the screen tracking area:
1. From the Windows NT Start menu, select Programs/Altek/Wintab Control Panel.
2. Double click the Customization icon.
3. Clear the Whole Tablet check box.
4. Place a data point in the grey rectangle of the Tracking Area menu.
5. Place a data point on the lower left corner of the desired tracking area in the digitizer active
tracking area.
6. Place a data point on the upper right corner of the desired tracking area in the digitizer active
tracking area.
7. Select OK to complete the operation.