Install The Studioz Producer Driver - Intergraph ImageStation Z Installation And Use Manual

If this is a first-time setup, install the StudioZ Producer driver software and activate the stereoscopic
display.

Install the StudioZ Producer Driver

The StudioZ Producer driver controls the operation of the StudioZ Producer JPEG board.
NOTE The JPEG board is factory-installed in the TDZ workstation base unit.
To install the StudioZ Producer driver:
1. Insert the diskette containing the StudioZ Producer driver in the system's floppy disk drive.
2. From the Windows NT Start menu, select Run.
3. Key in the path to the Setup program on the diskette (typically a:/setup).
4. Select OK.
5. When the Welcome dialog displays, select Continue.
6. When the Destination Directory dialog displays, select Continue to accept the default installation
path ( :\
C
7. At the Video Board Selection dialog, select No.
8. When the Misc Configuration Items dialog displays, select Continue to take the default settings.
9. When the Installation Successful dialog displays, select OK.
Changes will take effect after restarting the system. If this is a first-time setup, activate the stereoscopic
display before restarting the system.
\ \ ).
32
WIN APP INGR IVEDRV
15