Step2 Switching The Connection Method To Wireless Lan - Canon imageCLASS MF4570dw Settings Manual

Setting the wireless LAN

Step2 Switching the Connection Method to Wireless LAN

When the check described on the previous page is completed, switch the connection method to wireless LAN using this
machine.
1.
Press [ ] (Menu).
2.
Press [ ] or [ ] to select, and press [OK].
Menu
Network Settings
Preferences
Timer Settings
Common Settings
The next screen is displayed for approximately 5
seconds.
It is not necessary to turn OFF/ON the main
power of the machine here. It will be done on
5
Step .
Settings effective
after power is
turned OFF and ON.
3.
Press [ ] or [ ] to select, and press [OK].
Network Settings
Select Wired/Wireles
Wireless LAN Settin
TCP/IP Settings
SNMP Settings
1-2
. . .
4.
Press [ ] or [ ] to select, and press [OK].
Select LAN
Wired LAN
Wireless LAN
5.
After the next screen disappears, turn OFF/ON the
machine.
Turn main power OFF
and ON to enable
Wired/Wireless LAN
selection.
It is necessary to turn OFF/ON the machine for the
settings to take effect.
Wait for 10 seconds at least
ON
OFF
When the connection method has been changed,
proceed to "Step3 Selecting a Method for Setting the
Wireless LAN" on the next page.
ON
OFF