Canon imageCLASS MF4570dw Settings Manual page 6

Setting the wireless LAN
Step4-A Setting the Machine Using the WPS (Push Button Mode)
Follow this procedure only if you selected Step4-A "Setting the Machine Using the WPS (Push Button Mode)" on the
previous page.
1.
Make sure the procedure "Step2 Switching the
Connection Method to Wireless LAN" (P.1-2) is
completed.
2.
Press [ ] (Menu).
3.
Press [ ] or [ ] to select, and press [OK].
Menu
Network Settings
Preferences
Timer Settings
Common Settings
The next screen is displayed for approximately
5 seconds.
You do not need to turn the machine OFF and
ON at this stage.
Settings effective
after power is
turned OFF and ON.
4.
Press [ ] or [ ] to select, and press [OK].
Network Settings
Select Wired/Wirele
Wireless LAN Setting
TCP/IP Settings
SNMP Settings
5.
Press [OK].
See Wireless LAN
Setting Guide to
perform settings.
OK
1-4
6.
7.
8.
. . .
Press [ ] or [ ] to select, and press [OK].
Wireless LAN Settings
WPS Push Button Mode
WPS PIN Code Mode
SSID Settings
Wireless LAN Informa
Press [ ] to select, and press [OK].
Do you want to
connect with new
settings?
Yes No
Within 2 minutes, press and hold the WPS button
on the wireless LAN router or access point for
approximately 5 seconds.
Searching...
Press the access
point WPS button.
Cancel: Press Stop
Connecting...
Cancel: Press Stop
If "Cannot find access point" is displayed.
Press [OK] to close the screen and resume from
6
Step .
. . .