Canon imageCLASS MF4570dw Settings Manual page 10

Setting the wireless LAN
12.
Press [ ] to select, and press [OK].
Do you want to
connect with new
settings?
Yes
Connecting...
Cancel: Press Stop
The Wi-Fi indicator blinks.
The next screen is displayed for approximately 2
seconds, and the Wi-Fi indicator will start blinking.
Connected.
1-8
No
The wireless LAN setting is completed.
Next, install the software.
For details, please refer the "Starter Guide".
If an Error Message Appears
Press [OK] to close the screen, check if the network
key is correct, and follow the procedure from Step
again.
If the access point cannot be connected even after
retrying, see the following.
Proceed to "When an Error Message Appears, " on
P.2-2.
13.
Wait until the machine retrieves the IP address
automatically (approx. 2 minutes).
If you want to set the IP address manually, see the
following.
e-Manual "Network Settings" - "Basic Network
Settings" - "Setting the IP Address"
14.
Check the network connections
Check the operation using a computer which is
connected to a network.
Proceed to "Checking the Wireless LAN Setting is
Completed, " on p.Appendix-1.
7