Adjusting the Picture Size and Position
Use the lens shift dials, the adjustable tilt foot levers, the zoom lever or the focus ring to adjust the picture size and
position.
Adjusting the position of a projected image
[Lens shift]
Adjusting the throw angle (the height of an image)
[Tilt foot] *1
Adjusting the left and right tilt of an image
[Tilt foot]
NOTE*1: Adjust the throw angle (the height of an image) when the image position is higher than the lens shift adjustable range.
NOTE*2: See " Correcting Keystone Distortion" on page
* In the above drawings, cables are omitted for clarity.
3. Projecting an Image (Basic Operation)
Adjusting the focus
[Focus ring]
(→ page 27)
Finely adjusting the size of an image
[Zoom lever]
Adjusting the keystone correction
[Keystone] *2
30
for Keystone.