Optimizing an RGB Image Automatically
Adjusting the Image Using Auto Adjust
Optimizing an RGB image automatically.
Press the AUTO ADJUST button to optimize an RGB image automatically.
This adjustment may be necessary when you connect your computer for the first time.
[Poor picture]
[normal picture]
NOTE:
• Some signals may take time to display or may not be displayed correctly.
• The Auto Adjust function does not work for component, video signals.
• If the Auto Adjust operation cannot optimize the RGB signal, try to adjust Clock and Phase manually. (→ page 83)
Adjusting Volume Up & Down
Sound level from the speaker and the AUDIO OUT
jack (Stereo mini) on the projector can be adjusted.
Another way to adjust volume is to use the menu.
Select [ADJUST] → [AUDIO] → [VOLUME] from
the menu.
NOTE:
• Volume control is not available with the SELECT
or button when an image is enlarged by using the
MAGNIFY (+) button or when the menu is displayed.
3. Projecting an Image (Basic Operation)
SELECT
3D REFORM
AUTO ADJUST
SOURCE
ON/STAND BY
increase volume
decrease volume
3
LASER
L-CLICK
R-CLICK
MOUSE
PIP
FREEZE
ASPECT
LAMP MODE
AUTO ADJ.
USB
VOLUME MAGNIFY
PAGE
LAMP
UP
STATUS
POWER
DOWN
PICTURE
3D REFORM
PIC-MUTE
HELP
SELECT
3D REFORM
AUTO ADJUST
SOURCE
ON/STAND BY
LASER
L-CLICK
R-CLICK
MOUSE
PIP
FREEZE
ASPECT
LAMP MODE
AUTO ADJ.
PAGE
VOLUME
MAGNIFY
UP
DOWN
PICTURE
3D REFORM
PIC-MUTE
HELP
USB
LAMP
STATUS
POWER