NEC NP1150 - XGA LCD Projector User Manual page 76

4. Click [View status] displayed in blue on the right of [Local Area Connection] in the window.
the [local area Connection status] window appears.
5. Click [Details...].
Write down the value for "iPv4 iP address" (xxx.xxx.xxx.xxx) displayed.
6. Click [Close].
7. Click [X] at the upper right of the window.
the system goes back to the desktop.
Starting the Remote Desktop
1. With the projector turned on, press the SOURCE button.
the input selection window appears.
another way to display the input selection window is to press the netWOrK button on the remote control. the
netWOrK screen will be displayed. go to step 3.

4. Convenient Features