Menu Descriptions & Functions [Source]; Computer 1 And 2; Computer 3 (Rgb Digital); Component - NEC NP1150 - XGA LCD Projector User Manual

6. Using On-Screen Menu
 Menu Descriptions & Functions [SOURCE]

COMPUTER 1 and 2

Selects the computer connected to your COMPUTER 1 or COMPUTER 2 input connector signal.
NOTE:
• When the component input signal is connected to the COMPUTER 1, COMPUTER 2 or COMPUTER 3, select [COMPUTER 1],
[COMPUTER 2] or [COMPUTER 3] respectively.
• An optional component cable (Component V or ADP-CV1E cable) is needed for a component signal.

COMPUTER 3 (RGB Digital)

Selects the computer connected to your COMPUTER 3 (DVI-D) connector.

COMPONENT

Selects what is connected to your COMPONENT IN (Y, Cb/Pb, Cr/Pr).

VIDEO

Selects what is connected to your VIDEO input-VCR, laser disc player, DVD player or document camera.

S-VIDEO

Selects what is connected to your S-VIDEO input-VCR, DVD player, or laser disc player.
NOTE: A frame may freeze for a brief period of time when a video is played back in fast-forward or fast-rewind with a Video or
S-Video source.

VIEWER

This feature enables you to make presentations using a USB memory that contains captured images and slides cre-
ated with the exclusive Ulead Photo Explorer 8.0 for NEC contained on the CD-ROM. See the supplied NEC Wired
and Wireless Network Setup Guide for installing the Ulead Photo Explorer 8.0 for NEC.
(→ page 65)

NETWORK

Selects a signal from the LAN port (RJ-45) or the installed USB wireless LAN unit.
When a source connected on a network is not made settings, the [NETWORK] menu will be displayed. See the fol-
lowing pages. (→ page 102)

ENTRY LIST

Displays a list of signals. (→ page 78)