Table of Contents
Advertisement
❺ Adjusting the Picture Size and Position
Use the lens shift dial, the adjustable tilt foot, the zoom ring and the focus ring to adjust the picture size and position.
In this chapter drawings and cables are omitted for clarity.
Adjusting the projected image's vertical and horizontal
position
[Lens shift]
(→ page 23)
Finely adjusting the size of an image
[Zoom]
(→ page 31)
NOTE*
: Adjust the projected image's height using the tilt foot when you want to project the image at a position higher than the
1
lens shift adjustment range.
TIP:
• Built-in test patterns can be conveniently used for adjusting the picture size and position. (→ page 88)
A press of the TEST button will display the test pattern. The ◀ or ▶ button can select one test pattern. To close the test pattern,
change the source to another.
2. Projecting an Image (Basic Operation)
Adjusting the focus
[Focus]
(→ page 26)
Adjusting the projected image's height and horizontal tilt
[Tilt foot] *¹
(→ page 32)
22
Advertisement
Table of Contents
