❺ Adjusting The Picture Size And Position - NEC PX750U2 User Manual

❺ Adjusting the Picture Size and Position
Use the lens shift dial, the adjustable tilt foot lever, the zoom buttons and the focus buttons to adjust the picture size
and position.
In this chapter drawings and cables are omitted for clarity.
Adjusting the projected image's vertical and horizontal
position
[Lens shift]
Finely adjusting the size of an image
[Zoom]
Adjusting the keystone correction
[Keystone]
NOTE* : Adjust the projected image's height using the tilt feet when you want to project the image at a position higher than the lens
1
shift adjustment range.
TIP:
• Built-in test patterns can be conveniently used for adjusting the picture size and position. (→ page 104)
A press of the TEST button will display the test pattern. The ◀ or ▶ button can select one test pattern. To close the test pattern,
change the source to another.
2. Projecting an Image (Basic Operation)
Adjusting the focus
[Focus]
(→ page 23)
Adjusting the projected image's height and horizontal tilt
[Tilt foot] *¹
(→ page 28)
22
(→ page 25)
(→ page 29)
(→ page 30)