NEC NP1150 - XGA LCD Projector User Manual page 126

[ENTRY]
To assign your password:
NOTE: Up to 10 alphanumeric characters can be assigned.
1. Type a password.
Select the [ENTER PASSWORD] entry box and press the ENTER button. (→ page 73)
An asterisk will be displayed.
The Software keyboard appears. Use the Software keyboard to type a password on the [ENTER PASS-
WORD] screen and press the ENTER button.
The [CONFIRM PASSWORD] screen will be displayed.
2. Type the same password again and press the ENTER button.
Your password will be assigned.
[DELETE]
To delete your password:
1. Select [DELETE PASSWORD] and press the ENTER button.
2. Enter your password.
An asterisk will be displayed.
3. Press the ENTER button.
Your password will be deleted.
NOTE:
• Do not forget your password. However, if you forget your password, consult with your dealer.
• The [BACKGROUND LOCK] will not be affected even when [RESET] is done from the menu.
ACCOUNT LOCK
When [ACCOUNT LOCK] is set to [ON], you can set it to [OFF].
When [ACCOUNT LOCK] is set to [OFF], you can set it to [ON].
The [ACCOUNT] setting is available only when [ACCOUNT LOCK] is set to [OFF].
NOTE: Do not forget your password. However, if you forget your password, use the projector's ADMINISTRATOR account to log
on and set [ACCOUNT LOCK] to [OFF].
ACCOUNT
See page 51.

6. Using On-Screen Menu