Attach The Control Panel Overlays; Check Control Panel And Scan Unit Switch Settings - Lexmark X443 User Manual

2

Attach the control panel overlays

If you received a control panel with overlays already applied, skip to
the next step.
1
Choose the overlays in your language.
2
Peel each section from the backing, and then press it firmly on the
OptraImage control panel.
Important: Because the indicator lights need to shine through the overlay,
carefully align the edges and the holes.
3
Check control panel and scan unit
switch settings
Control panel switch settings
Before connecting the OptraImage control panel to the other hardware, check
the dip switch settings. Make sure all switches are in the down position (on).
Switch 4 determines the SCSI bus termination setting of the control panel.
10
Some control panels are
shipped with the English
overlays already attached.
Some are shipped without any
overlays attached.