Uniden XC 340 Operating Manual page 9

For australia and new zealand
Table of Contents

Advertisement

DC Input
Jack
Plug the AC Adaptor cord into this jack. Then pluGthe
AC Adaptor into a standard wall outlet.
Handset Retainer Reverse this retainer to hang up the Handset when the
XC 340 is mounted on a wall.
Lights when the Handset is on the Base Unit and the Batte.-y
Pack inside the Handset is charging.
INT'COM
Button
Use to page the handset, or to receive a page from the
Handset, and activate the Intercom between the Base Unit
and Handset. Also, when a phone call is answered at the
Base Unit, use this button to page the Handset to pick up
the call. Then press INT'COM again or SPEAKER to transfer
the call.
(Note: The Base Unit's INT'COM function does not work
if the handset is in use or if its Ring On/Batt. save switch
is in the "Batt Save" position.)
SPEAKER Button Use to answer a phone call at the
Base
Unit and speak to the
caller. Also, after pressing INT'COM or SPEAKER to
transfer
a call to the Handset, press SPEAKER to establish 3-way
communication among the Base Unit, Handset, and caller.
Lights when you press INT'COM to place a call on
!loid,
or
when you are using the Intercom functions.
Use to adjust the volume ieve! of the Speaker.
Base Unit
Antenna
Speaker
Microphone
IN USE LED
CHARGE LED
SPEAKER LED
Volume Control
Collapsible antenna provides maximum communicatior,
.
range when fullyextended and in vertical
position.
!
Lets you hear the caller, or the person talking to you from the
Handset. Also, enables you to hear the ringing when a call or
page
is
received.
Use to talk to the caller, or the person paging you from the
Handset.
Lights when the phone is in use; blinks when the Base Unit
rings. Also, blinks when you press INT'COM to place a call
on hold.
7

Advertisement

Table of Contents
loading

Table of Contents