Configuring Your Software For The Printer; Choosing From A Menu - Epson LQ-1070+ User Manual

Configuring Your Software for the Printer

Most software lets you specify the type of printer you use so
that you can take full advantage of the print&s features. Your
software probably provides an installation or setup section that
presents a list of printers.

Choosing from a menu

To take full advantage of your printer's features, including
choose the
ESC/P
2,
the menu. If these printers are not listed, contact the software
manufacturer or see "Where to Get Help for United States
Users" at the beginning of this manual to see ifan update to
the software is available. Until you receive an update, choose
from the following listz
ActionPrinter 5000+
ActionPrinter 5000
LQ-570/1070
LQ-870/1170
LQ-100
SQ-870/1170
LQ-510/550
LQ-500
LQ-860 / LQ-1060
LQ-850 /LQ-1050
LQ-2550
If none of these printers is listed, select the first one available
from the following listz LQ, FX, LX, RX, MX, Epson printer,
Standard printer,Draft printer. Because some of the printers in
this list are 9-pin printers, your graphics printing may not be
correct.
Setting Up the Printer
1-14
or Stylus 800/1000 from
LQ-570+/1070+