3. Turn the ribbon-tightening knob in the direction of the
easier to install. Next, hold the ribbon cartridge by its
handle and push it fixmly down into position; then pnzss
on both ends of the cartridge to make sum the plastic
hooks fit into the slots.
4 .
Use a pointed object, such as a ball point pen, to guide the
ribbon between the print head and ribbon guide. Turn the
ribbon-tightening knob to help feed the ribbon into pla<~.
5.
Slide the print head from side to side to make sure it moves
smoothly. Also check that the ribbon is not twisted or
1-6
Setting Up the Printer