Configuring Your Software For The Printer; Choosing From A Menu - Epson 5000+ User Manual

Configuring Your Software for the Printer

Most software lets you specify the type of printer you use so
that you can take full advantage of the printer's features. Your
software probably provides an installation or setup section that
presents a list of printers.

Choosing from a menu

To take full advantage of your printer's features, including
ESC/P 2, choose the LQ-570+ or Stylus 800 from the menu. If
these printers are not listed, contact the software manufacturer
or see "Where to Get Help for United States Users" at the
beginning of this manual to see if an update to the software is
available. Until you receive an update, choose from the
following list:
Action Printer 5000+
Action Printer 5000
LQ-570/1070
LQ-870/1170
LQ-100
SQ-870/l170
LQ-510/550
LQ-500
LQ-860 (LQ-1060)
LQ-850 (LQ1050)
LQ-2550
If none of these printers is listed, select the first one available
from the following list: LQ, FX, LX, RX, MX, Epson printer,
Standard printer, Draft printer. Because the printers in this list
are 9-pin printers, your graphics printing may not be correct.
Setting Up the Printer 1-15