Using Continuous Paper; Tractor Position And Available Paper Paths - Epson LQ-1070+ User Manual

Use the knob on the
printer ur awe it to luse the top-oj$nm position.
If the platen turns but the printer doesn't load the paper,
completely remove the paper and re-insert it more firmly.
To eject the paper, press the
N o t e

Using Continuous Paper

You can print on continuous paper from 101 mm (4 inches) to
254 mm (10 inches) wide on the LQ-570+ and from 101 mm (4
'inches) to 406 mm (16 inches) wide on the LQ-1070+.
Tractor position and avai/abie paper paths
You can feed continuous paper from the rear, front, or bottom.
Your printer comes with the tractor installed in the
push-tractor position, for feeding paper from the rear. To feed
paper from the front 0rWto~installthetractorinthe
pull-tractor position. You can also install an optional pull
Always move the paper-release lever to the position indicated
for the paper-feeding method you are using, as shown in the
table on page 2-8.
Make sure you align your paper supply with the paper loaded
in the tractor so the paper feeds smoothly into the printer.
the printer only to clear paper
side of
right
LOAD/EJECT
button.
Paper Handling 2-7