General Information; Network - Tripp Lite B020-U08-19-IP Owner's Manual

7. Administration

7.3.1 General Information

As previously mentioned, the General Information page is the first page you see upon logging into the Web Management Interface. When navigating
through the Web Management Interface, you can always display the General Information page by clicking on the icon at the top of the screen. The
information on this page is discussed in the table:
Field Description
Device Name To make it easier to manage installations that have more than one KVM connected to the network, you are given the option of entering
a unique device name. To assign a device name for the KVM switch, simply type the desired name in this field (16 characters max). By
default, the device name is the model name of the KVM.
MAC Address The KVM's MAC address displays here. A MAC address label can also be found on the bottom panel of the console.
Firmware Indicates the current IP firmware version. This firmware controls the IP functionality of the KVM switch, whereas a separate version,
Version upgradeable via the Local Console OSD, controls the basic KVM and console functionality. New firmware files can be downloaded from
www.tripplite.com/support as they become available. You can reference this number to see if the version on the website is newer than
that on your KVM.

7.3.2 Network

Clicking on the Network icon at the top of the screen brings you to the
Network page. From here you can set access ports that will be allowed by
a firewall, configure the KVM's IP address and DNS server address, and
set the IP Installer settings. IP Installer settings can only be changed
using the Web Management Interface.
Access Ports
If a firewall is being used, these fields allow administrators to specify port
numbers that the firewall will allow. The firewall must be set to allow
access to these ports. If an invalid port number (or no port number) is
specified in the firewall, the KVM switch will not be found. An
explanation of the ports you can set via this page is given in the table:
Port Description
Program This is the port number that must be specified when
connecting to the KVM via the AP Windows or Java Cient.
The default is 9000.
HTTP This port number is for a browser login. The default is 80.
HTTPS This port number is for a secure browser login. The
default is 443.
Note: A different value must be set for each access port. If there is no
firewall, it doesn't matter what these numbers are set to, since they have
no effect.
201009236 93-2985.indd 43
( continued )
IP Address and DNS Server
Both the IP address and DNS Server address can be assigned either
automatically by a DHCP server or given a fixed IP address by an
administrator. By default, the KVM is set to have its IP address assigned
automatically via DHCP server. To set the IP address and DNS Server
address of the KVM, follow these steps:
1. To have the IP address pulled automatically via DHCP server, make
sure that the Obtain an IP address automatically [DHCP] option is
selected.
2. To assign a fixed IP address, make sure the Use the following IP
address [Fixed IP] option is selected.
3. Fill in the IP Address, Subnet Mask and Default Gateway fields with
information appropriate to your network.
4. If you have set the IP address to be pulled via DHCP server, you can
either choose to assign the DNS server address via DHCP as well, or
assign a fixed DNS server address. If you have assigned a fixed IP
address for the KVM, you must also assign a fixed DNS server
address. To have the DNS server address pulled via DHCP server,
make sure that the Obtain DNS server address automatically option is
selected. To assign a fixed DNS server address, make sure that the
Using the following DNS server address option is selected.
5. Fill in the Primary DNS server and Alternate DNS server fields with
information appropriate for you network.
Note: Specifying the primary DNS Server address is mandatory. The
alternate DNS Server address is optional.
6. After all changes have been made, make sure that the Reset on exit
checkbox in the Customization screen is checked. This checkbox
should automatically be checked anytime network settings have been
changed.
7. Exit the remote session and logout of the KVM switch. Upon logging
out of the KVM, a prompt will appear stating the KVM will be reset.
Upon completion of the KVM reset, the new network settings will be
saved.
43
11/18/2010 4:21:48 PM