Logging Into The Kvm Over Ip; Logging In Via Web Browser - Tripp Lite B020-U08-19-IP Owner's Manual

6. KVM Operation
6.4.10 Local Console Hotkey Commands ( continued )
Hotkey Summary Table
Note: All of the hotkey commands in this table require Hotkey Mode to be invoked prior to implementing the hotkey command. (See page 15 for details on
invoking Hotkey Mode.)
Hotkey Operation
Selecting the active port
Auto Scan mode
Hotkey beeper control
Port OS (Windows)
Port OS (Mac)
Port OS (Sun)
Computer keyboard/mouse reset
Hotkey mode invocation sequence
OSD invocation sequence
Restore default values
Skip Mode/Previous port
Skip Mode/Next port
Skip Mode/Previous station
Skip Mode/ Next station

6.5 Logging Into the KVM over IP

There are three methods that can be used to connect to the KVM switch over IP; Web Browser, AP Windows Client and AP Java Client.

6.5.1 Logging In via Web Browser

1. Open your web browser and type in the IP address of the KVM. (See
Network Setup – IP Address Configuration on page 10 for details on
determining the KVMs IP address.)
2. A screen will appear asking you to provide a username and password.
Note: If you are first prompted by a screen that says the websites security
certificate can not be trusted, click on the link to proceed anyways; the
certificate can be trusted.
201009236 93-2985.indd 17
( continued )
Hotkey Command Description
[Station ID], [Port ID], [Enter] Switches the KVM focus to the Station and Port entered in this command. (See page
15 for details on Port ID numbering.)
[A], [Enter] or
Invokes Auto Scan Mode. Press the [P] key at any time during an auto scan to pause
[Q], [Enter]
on the currently selected computer. Press the [Esc] key or [Spacebar] key to exit
Auto Scan Mode at the currently selected computer.
[B] Toggles the beeper sound ON/OFF.
[F1] (Administrator-only hotkey) Sets the OS of the currently selected port as Windows.
[F2]
(Administrator-only hotkey) Sets the OS of the currently selected port as Mac.
[F3] (Administrator-only hotkey) Sets the OS of the currently selected port as Sun.
[F5] Performs a keyboard/mouse reset for the currently selected computer.
[H] Toggles the sequence to invoke Hotkey Mode between [Num Lock, Minus] and
[Ctrl, F12].
[T] Toggles the sequence to invoke the OSD between [Scroll Lock, Scroll Lock] and
[Ctrl, Ctrl]. Sets the invocation sequence for both the Local Console OSD and the
Remote OSD.
[R], [Enter]
(Administrator-only hotkey) Restores the OSD to its default values. Restores both the
Local Console OSD and the Remote OSD.
When typed into the hotkey command line, this key invokes Skip Mode. When in Skip
[ ]
Mode, this key switches KVM focus to the port prior to the currently selected port.
When typed into the hotkey command line, this key invokes Skip Mode. When in Skip
[ ]
Mode, this key switches KVM focus to the port after the currently selected port.
When typed into the hotkey command line, this key invokes Skip Mode. When in
[ ]
Skip Mode, this key switches KVM focus to the last port on the station prior to the
currently selected port.
When typed into the hotkey command line, this key invokes Skip Mode. When in Skip
[ ]
Mode, this key switches KVM focus to the first port on the station after the currently
selected port.
3. If accessing the KVM for the first time, enter in the username
administrator and the password password. For security purposes, it
is strongly recommended that you change the username and password
on this account to something unique. When you have entered your
username and password, the KVM web interface will appear with the
following page displayed:
17
11/18/2010 4:21:37 PM