Remote Auto Scan; Panel Array Mode - Tripp Lite B020-U08-19-IP Owner's Manual

6. KVM Operation

6.6.4 Remote Auto Scan

When Auto Scan Mode is invoked via the remote OSD toolbar, the
KVM begins scanning according to the Scan Select and Scan Duration
settings in the Configuration tab of the remote OSD (see page 32 for
details). During an auto scan, normal keyboard and mouse functionality
is suspended. Keyboard functionality is limited to the [Spacebar] key
(exits auto scan at currently selected port), [Esc] key (exits auto scan at the
currently selected port), [P] key (pauses auto scan at the currently selected
port) and the [Ctrl], [Alt], [Delete] command for the local computer.
Mouse functionality is limited to the auto scan toolbar, which replaces the
remote OSD toolbar. The icons in the auto scan toolbar are described in
the table:
Icon Description
Indicates that the currently selected port is being accessed in Auto Scan Mode.
Pauses the auto scan at the currently selected port.
Exits auto scan at the currently selected port
Displays the port ID according to the Display Mode setting in the Configuration tab of the remote OSD (see page 32 for details) or the F3 Set
page of the local OSD (see page 28 for details).

6.6.5 Panel Array Mode

Panel Array Mode allows connected computers to be simultaneously
monitored by dividing the screen into a grid of panels, with each panel
representing a KVM port. When Panel Array Mode is invoked via the
remote OSD toolbar, it scans the connected computers per the Scan Select
setting in the Configuration tab of the remote OSD.
201009236 93-2985.indd 22
( continued )
A panel array toolbar is located in the lower right corner of the panel array
mode screen. As with the other toolbars, the panel array mode toolbar
can be dragged to anywhere on the screen. The table describes the icons
located in the panel array toolbar:
Icon Description
Moves the focus of the panel array scan back four panels.
Moves the focus of the panel array scan back one panel.
Pauses the panel array mode scan, leaving the focus on the cur-
rently highlighted panel.
Moves the focus of the panel array scan forward one panel.
Moves the focus of the panel array scan forward four panels.
Increases the number of panels displayed in panel array mode.
Decreases the number of panels displayed in panel array mode.
Toggles the 4/3 aspect ration.
Exits panel array mode at the currently highlighted port.
22
11/18/2010 4:21:39 PM