Video; General - Sony KDP-51WS655 Operating Instructions Manual

Vfdeo
No picture [_ If your TV does not turn on, and a red light keeps flashing, your TV may
(screen not lit), no sound need service. Call your local Sony Service Center.
[_ Make sure the power cord is plugged in.
[_ Press the POWER button on the front of the TV.
[_ Press the TV/VIDE0 button to cycle through the connected video sources.
[_ Try another channel; it could be station troub]e.
Dark, poor or no [_ Adiust the Picture option in the Video Menu (see page 84).
picture (screen lit), _ Ad}ust the Brightness option in the Video Menu (see page 84).
good sound _ Check the antenna/cable connections.
No color F_ Aci}ust the Color option in the Video Menu (see page 84).
Only snow ;met noise [_ Check the antenna/cable connections.
;_ppear on the screen _ Try another channe]; it could be station troub]e.
................. _ Press ANT to ch!!nge tire, input mode (see page' 49).
Dotted lines [_ Ad}ust the antenna.
or stripes [_ Move the TV away from noise sources such as cars, neon signs, or hair-
dryers.
< ...............
Double images or ghosts [_ Using a highly directional outdoor antenna or a cable may solve the
problem.
Black box on screen [_ You ha_ e selected a text ophon m the Setu t. Menu and n _ text is a_ affable.
(See page 94 to reset Setup selections.) To turn off this feature, set the
Caption Vision option to Off. If you were trying to select closed captioning,
select CC1 instead of TEXT 1-4.
Bars appear at the [_ Some wide-screen programs are filmed in aspect ratios that are greater
top and bottom of the screen than 16:9, such as 2.,_, :1. (This is especially common with theatrical
releases). Your TV will show these programs with bars at the top and
bottom of the screen. For more details, check the documentation that came
with your DVD (or contact your program provider).
General
How to reset TV to [_ Turn on the TM While holdh_g down
the RESETbutton
on the remote
f;_ctory settings control, press the POWER button on the TV. (The' TV will turn itself off, then
back on again.) Release the, RESET button.
How to restore Video settings [_ Press the RESET button on the remote control while in the Video Menu (see
to f;_ctory settings page 84).
How to restore Audio [_ Press
the RESETbutton
on the remote control while in the Audio Menu (see
settings to f;_ctory settings page 86).
Cannot cycle through the [_ Be sure the Label Video Inputs option is not set to Skip (see page 95).
other video equipment
connected to the TV
Cannot oper,_te Menu ........................ _ Menu opt;on _ppears ;n gray, is in a stat_' in
which the Menu option is not available.
Lost password [_ In the password screen (see page 91), enter the following master password:
4357. The master password clears your previous password; it cannot be
used to temporarily unblock channels.
105