Vcr And Cable Box - Sony KDP-51WS655 Operating Instructions Manual

VCR and Cable
Box
_ Using
SVDEO jacks?
See page 23,
Forbest
results, use
this connectionif:
[] Your cable company scrambles some cham_els, such as premium
channels (which requires you to use a cable box), but does not
scramble all channels.
With this connection you can:
[] Use the TV remote control to change channels coming through
the cable box. (You must first program the remote control for
your specific cable box; see "Programming the Remote Control"
on page 50.)
[] Use the TV remote control to change channels coming directly
into the TV's CABLE jack. (The TV's tuner provides a better
signal than the cable box.)
[] Record channels coming through the cable box and channels
coming directly into the TV.
1"oconnect a VCRand cable box, you need:
[] A splitter, which is a small, inexpensive device that you can
purchase at your local electronics store.
[] Four coaxial cables.
[] Two A/V cables or two S VIDEO cable with audio cables.
1o connect the VCRand cable box
1 Connect the CATV cable to the single (input) jack of the splitter.
2 Use a coaxial cable to connect one of the splitter's two output
jacks to the TV's CABLE jack.
3
Use a coaxial cable to connect the splitter's other output jack to
the cable box's input jack.
4 Use a coaxial cable to connect the cable box's output jack to the
VCR's RE input jack.
5 Use a coaxial cable to connect the VCR's RE output jack to the
TV's VHE/UHE jack.
6 Use an A/V cable to connect the cable box's A/V output jacks to
the TV's A/V input jacks.
7 Use an A/V cable to connect the VCR's A/V output jacks to the
TV's A/V input jacks.
8 Run Auto Program, as described in "Setting Up the Channel List"
on page 43.