Sony KDP-51WS655 Operating Instructions Manual page 99

[]To go directlyto
programmingTimer1 or 2,
press(_ insteadof
pressing.*..
[]To return to the Timer
Menu after programmingone
of the Timers,press(lid
when the highlight is in the
channelnumberfield.
[]To return to the Timer
Menu after settingthe
Current Time,press
when the highlight is in the
minute field.
Timer 1 and Timer 2 are not available to be set until you set
the Current Time.
1 Press * or '_ to highlight Timer 1 or Timer 2. To set the
timer, press ._.
2
Press * or • to highlight one of tire following options,
then press _.
Program
off
Select to set the Timer by day,
time, duration, and channel.
Select to tunr off the Timer. (Your
previous settings are saved.)
3 If you selected Program in step 2, Press * and '_ to set
the d _y(s), hour, minute, duration, and channel
number. Press _ or ._ to confkm each setting and
move to the next setting. Press _, to go back to the
previous setting.
4 Press MENU to exit the Menu. An LED on the front
panel will light, indk:ating the timer has been set.
Current Time
1 Press _ to select Current Time.
2
Press t1"and _" to set the current time (day, hour, and
minute). Press _ or ,_ to confirm each setting and
move to the' next setting. Press _, to go back to the
previous setting.
3
Press MENU to exit the Menu.
Diagnostics Displays the strength of the terrestrial digital broadcast
signal, to help you adiust your antenna to optimize signal
reception.
CableCARD This list of selectable CableCARD options will vary,
depending on your cable service provider.