Satellite Re - Sony KDP-51WS655 Operating Instructions Manual

Sa tellite Receiver
and VCR
using
k_J sVIDEO jacks,_
See page 23,
Toconnecta satellite receiverand VCR
1
Connect the CATg cable to the single (input) jack of the splitter.
2 Use a coaxial cable to connect one of the splitter's two output
jacks to the TV's CABLE jack.
3
Use a coa×ia] cable to connect the splitter's other output jack to
the satellite receiver's VHE/UHE input jack.
4 Connect the satellite antenna cable to the satellite receiver's
satellite input jack.
5 Use a coa×ial cable to connect the satellite receiver's VHE/UHE
output jack to the VCR's VHE/UHE input jack.
6 Use an A/V cable to connect the satellite receiver's A/V output
jacks to the TV's A/V input jacks.
7 Use an A/V cable to connect the VCR's A/V output jacks to the
TV's A/V input jacks.
8 Run Auto Program, as described in "Setting Up the Channel List"
on page 43.
Ill
CADLE
"_ 41:lml 17 N
VHFIUHF
_x
VI_EO _
ReL_
ANcab,e 0
CAW .
cable_
Coaxial
cable
AIV cable
7
Splitter
(not supplied)
Satellite antenna
3 cable
Coaxial
cable
4
I
, ; ! ! !
_ Cables are often
cO!Or-coded _0 conneCtQrS_
cable_ white ta white, etc.
N II n II
U.E;Ii