Overview; Making Video And Audio Connections - Sony GRAND WEGA KDF-E42A10 Operating Instructions Manual

Overview
Your new LCD projection TV can receive both analog and digital
broadcasting signals fiorn antenna, satellite and cable TV.
To display clear crisp pictures, you must connect your TV correctly and
choose tile correct display forlnat (see " s"
U.'mg tile WIDE Button" on page
53). It is strongly recommended to connect the antenna using a 75-ohm _"
coaxial cable to receive optimum picture quality signal. A 300-ohm twin ._
lead cable can be easily affected by radio noise and tile like, resulting in
"4
signal deterioration. If you use a 300-ohm twin lead cable, keep it as far _:
away as possible from the TV.
Making Video and
Audio Connections
The signals that enter your TV and connected devices will need to output in
the correct format using the suitable connections. Below are different types
of video connectors available these days. Your TV comes with all types of
connectors with the exception of the DVI connector but your cable box or
satellite receiver may be equipped with this type. When connecting your TV.
use the inputs that are available on your devices that provide the best video
performance, as described below.
Best Video
Performance
HDml HDMI No
(High-Definition Multimedia Interface)
DVI (Digital Video Interface) *
@ @ @ Component video Yes
,/ P_c_P_c. (480i/480p/720p/1080i)
L-AUDIO-R
__,o_o_ S VIDEO
Composite video
RF/Coaxial No
• An adapter is necessary when you are connecting a DVI-equipped device to this TV
(see page 20).
19