Sony Handycam HDR-FX1 Operating Instructions Manual page 47

lbrmat is played back, an eqnivalent signal
with [480i] is output, even if [1080i/480i] is
selected.
• Only video signals are output from the
COMPONENT OUTPUT jack. To output
audio signals, connect the white and red plugs
of the AiV connecting cable to the audio input
jack ofyonr TV.
To connect the TV using the A/V
connecting cable
When there is an S video.jack on the device to
be comlected, connect it with your camcorder
by the S video jacks using an S video cable
(optional) instead of the yel!ow video plng of
the AV connecting cable (supplied). This
connection prodnces pictures more faithfully on
the TV connected. The audio will not be output
when you comlect with the S video cable alone.
Note
• Be sure that you set [VCR HDV/DV] before
connecting the i.LINK cable Otherwise, tlle TV
might not be able to recognize the video signal
correctly.
• Pictures in the DV format are not output from _he
COMPONENT OUT jack, if copyright protection
signals are recorded in the pictures
"_° Tip
• If you connect yore camcorder to your TV using
mo_e than one type of cables to output the pictmes in
analog si_ml, the output signals have priority in the
following order:
COMPONENT OUTPUT jack _ S video jack
AUDIO_\TDEO jack
• See page 94 tbr details on i.LINK
When your IV is connectedto a VCR
(onnect yonr camcorder to the LINE IN input
on the VCR using the AiV connecting cable. Set
the input selector on the VCR to LINE.
m
Playback 47