Step 5: Setting The Date And Time - Sony Handycam HDR-FX1 Operating Instructions Manual

When the
picture in the viewfinder is
hardto see
If you cannot see the picture in the viewfinder
clearly under bright circnmstances, use the
snpplied large eyecup.
To attach the large eyecup, stretch it a little and
align it with the groove of the viewfinder, then
slide it up to the end. You can attach the large
eyecup facing either the right or left side.
Large eyecup
(supplied)
Step 5: Setting the
date and time
Set the date and time when using this
camcorder for the first time. If you do not set
the date and time, the [CLOCK SET] screen
appears every time you turn on your
camcorder.
(J Note
• If you do not use your camcolde! tbl about 3
months, the built-in rechargeable button-type
barrel 7 gets discharged and the date and time
settings may be cleared from the memo! 7 In tllat
case, charge the rechargeable button-type batte!),
(p. 97) and then set the date and time again
"_" Tip
• To select the brightness of the viewfinder backlight
when you are using the battery pack, select
(LCDi\T SET) menu, then [VF B.LIGHT] (p. 58).
MENU
¢{
c_
C
SEIdPUSH EXEC
POWER switch
1 Turn on ),our camcorder (p. 14).
Open the LCD panel and adjust the
angle.
Proceed to step 6 when yon set the clock for
the first time.
16 Getting
started