Sony Handycam HDR-FX1 Operating Instructions Manual page 35

Item Adjustment
[SKINTONE To make wrinkles less
DTL] noticeable by suppressing the
outlines on the part of skin
color to be enhanced.
[TYPEI] (the color range
recognized as a skin color is
narrow) to [TYPE3] (the color
range recognized as a skin
color is wide)
In the case of [TYPE3], the
effect may also be applied to a
color that is not a skin color
[OFF]: no adjustment
[AE SHIFT] 7 (darker) to *7 (lighter)
[AGC LIMIT] Select the tipper limit/'or the
gain ([OFF], 12dB, 6dB,
0dB)
[OFF] is 18dB.
[AT IRIS Select the highest apeltme
LMT] value tbr the automatic
adjustment (FI 1, F6.8, F4).
[WB SHIFT] 7 (to make white pats
bhlish) to +7 (to make white
pa!ls reddish)
[AWB SENS] To set the auto white balance
operation trader a reddish light
source such as an
incandescent lamp or candle,
or under a bhleish light source
such as in outdoor shade.
[HIGH] (reddishness or
bhleishness is reduced) to
[LOW] (reddislmess or
bhleishness is increased)
[AWB SENS] is not effective
lmder a clear sky or the sun.
[CINEMA- [ON]: Pictmes are recorded
TONE 7] with the gamma cm_,e that
repro&ices the nanlral
Nadafion sequence, similar to
that of fihn cameras.
Item Adjustment
[CINE- [CINEFRAME 30]:
FtLA_NIE] Pictmes are recorded with a
cinema-like atlnosphele. This
produces the feel of
smoothness better than
[CINEFtL4_ME 24].
[CKNEFt_ME 24]:
Pictmes are iecorded with the
atmosphere of 24 fiames pei
second adopted by fihn
iecoiding.
[OFF]: normal iecording
[COPY] To cop), a picaue profile
setting to other picialre
profiles
[RESET] To iestoie the default setting
of the picnlre pwfile
Repeat steps 4 and 5 to adjust other
items.
Select [_ RETURN] by turning the
SEL/P[ SH EXEC dial, then press the
dial.
Select [OK] by turning the SEL/PUSH
EXEC dial, then press the dial.
A pictnre profile indicator appears.
To cancel the picture profile recording
Select [OFF] in step 2, then press the
PUSH EXEC dial.
To checkthe picture profile settings
During recording or in the standby mode, press
STATUS CHECK (p. 24).
To copy the picture profile setting to
other picture profiles
1
Press PICTIRE PROFILE.
2 Select the number of the picture profile
to be copied from by turning the SEL/
PISH EXEC dial, then press the dial.
3 Select [SETTING] by turning the SEL/
PISH EXEC dial, then press the dial.
,_continued
Recording 35
m
o
5'