Using An Outside Power Source; Step 3: Turningthe Power On - Sony Handycam HDR-FX1 Operating Instructions Manual

• The CHG (charge) lamp flashes during charging, or
the battel), inlbrmafion will not be conectly
displayed in tbllowmg conditions.
The batte!)' pack is not attached conectly.
The battery pack is damaged.
The battery pack is fully discharged. (For Batte_w
inlbmlafion only.)
You can use the AC Adaptor as the power
source when you do not want the batter T to
run out. While you are using the AC Adaptor,
the battery pack will not lose its charge even
when it is attached to your camcorder.
PRECAUTION
Even ifyonr camcorder is turned ofi. A( power
(house current) is still supplied to it while
connected to the wall outlet via the AC Adaptor.
Connect )'our camcorder as shown in
"Step 2: Charging the battery pack"
(p. 11).
Step 3: Turningthe
power on
You need to set the POWER switch to the
respective power mode to record or play back
pictures.
When using this camcorder for the first time,
the [CLOCK SET] screen appears (p. 16).
While pressing the green button, set the
POWER switch.
The power turns on.
• CAMERA: To record pictures.
• VCR: To play or edit pictures.
To turn off the power
Set the POWER switch to OFF ((HG).
14 Getting
started