Sony Handycam HDR-FX1 Operating Instructions Manual page 76

Insert a cassette ibr recording m yonr camcorder
before the ibllowing operations.
1 Connect ),our TV or VCR to your
camcorder as a playback device
(p. 74).
If you are recording from a VCR,
insert a cassette.
Set the POWER switch to VCR.
4 Set your camcorder to recording
pause.
While pressing II (panse), press both •
REC (record) bnttons simultaneously.
PAUSE REC 1
@
J
Start playing the cassette on your
VCR, or select a TV program.
The picture played on the connected device
appears on the LCD screen of yonr
camcorder.
Press II (pause) again at the point you
want to start recording.
Press • (stop) to stop recording.
0 Note
• When you use an i.LINK cable the lecorded picture
becolnes !ough when a picture is paused on your
VCR
• When you use an iiINK cable, you cannot record
the picture and sound separately.
• When you use an i.LINK cable, if you panse or stop
the recording and restart it, the picture may not be
recorded smoothly.
"_° Tip
• The i.LINK lamp HDV or DV oil tile _, HDViDV
jack holder will light tip and indicate the folmat of
the inpllt signal when you use an i.LINK cable
• When you use an i.LINK cable the video and sound
signals are transmitted digitally producing high
quality pictures.
• When you use an iLINK cable
HDV/DVIN
appears during recording. This indicator may appear
on the screen of the playback device, however they
will not be recorded
• Index signals are automatically recorded on the tape
during recording. You can also record index signals
at the desired positions during recording by pressing
the ASSIGN button assimled to the index fimction
(p 39).
76 Dubbing/Editing