Sony Handycam HDR-FX1 Operating Instructions Manual page 78

Dubbingsoundto a
recordedtape DV
You can record additional audio to the
original sound on a tape recorded in the DV
fomlat. You can add sound to a tape already
recorded in the 12-bit mode without erasing
the original sound.
_2::::1 Signal flow
Audio device (such as
CD/MD players)
_ Internal microphone
LINE OUT
Audio output jack_ L@ OR
Do not connect the _
Video plug (yetlow)._ _ _'--"_
AUBIONIDEO _ _AUDIO/VIDEO jack
Audio L
A/V connecting cane
(supplied) (white)
_MIC (PLUG IN POWER)/LINE
MICILINE jack
Microphone (optionaI)
OMIC (PLUG iN POWER)/LINE jack
Record audio in one of the following ways.
• Using the internal microphone (no connection
reqnired)
• Connecting a microphone (optional) to the
MI(/LINE .jack. (t_)
Select the _ (AUDIO SET) menu, [MI(i
LINE IN], then [EXT MIC] (p. 57).
• Connecting an audio device (optional) to the
MIC LINE .jack. (1_)
Select the ,_ (AUDIO SET) menu, [MI(
LINE IN], then [LINE] (p. 57).
• Connecting an audio device to the AUDIO/
VIDEO jack. (_)
The audio input to be recorded takes precedence
in the order of MIC LINE jack --+ AUDIO,
VIDEO jack --+ internal microphone.
(J Note
• When you use the AUDIO/\'IDEO jack or the
internal microphone to record additional sound, the
pictalre will not be ouilmt from the AUDIO/VIDEO
jack. Check the picture on the LCD screen or the
viewfinder, and the sound on the headphones.
• You cannot record additional audio:
When the tape is recorded in the HDV format
When the tape is recorded in the 16-bit mode
When the tape is recorded in the LP mode
When your camcorder is connected using an
i.LINK cable.
78 Dubbing/Editing