Sony Handycam DCR-SR100 Operating Manual page 62

_ $_NDARD SET {c0_i_e_}
The recorded image will not be affected even
when you change the setting.
N LCD BRIGHT
You can a@ist the brightness of the LCD
screen.
(_) Acliust the brightness with [_/Ei_.
(_) Touch [_.
N LeD BLLEVEL
You can a@tst the brightness of the LCD
screen's backlight.
_HORMAL
Standard brightness.
BRIGHT
Brightens the LCD screen.
• When you use the AC Adaptor as the power
source, [BRIGHTI is aulonmlically selecled lor
tile setting.
• When you select [BRIGHT], battery lilP is
slightly reduced during recording.
N LCDCOLOR
You can a@tst the color on the LCD screen
with [SZ1115?_ •
Low inlensity High inlensUy
N VFB.LIGHT
_m can a@tst the brightness of the
viewfinder.
_NORMAL
Standard brightness.
BRIGHT
Brightens the vie_finder screen.
• When you connecl your camcorder to AC
Adaptor, [BRIGHTI is automatically seleclcd lor
the setting.
• When you select [BRIGHTI, baltery lilP is
sligla/y reduced during recording.
You can select how a 16:9 (wide) aspect ratio
image appears in the viewfinder.
_" LETTERBOX
Normal setting (standard type of screen)
SQUEZE(Squeeze)
Expands the image vertically if black bands
at the top and bottom in 16:9 (x_ide) aspect
ratio are undesirable.
See page 42.
You can select data transfer speed used to
transfer data to your computec
AUTO
Sends data b} s_itching automatically
between the Hi=Speed USB IUSB 2.0) and
the speed corresponding to USB 1.1 lfull
speed transfer).
FULLSPEED
Sends data corresponding to USB 1.1 (fill
speed transfer).
You can check the information recorded
atttomatically (data code) during playback.
0 FF
Data code ixnot displayed.
DATE/TIME
Displays the date and time of recoaled
images.
CAMERA DATA
Displa} sthe camera setting data of recorded
images.
N VF WIDE DISP
62