Functionsusedfor Recording/Playback,Etc; Touse Zoom; To Use The Flash - Sony Handycam DCR-SR100 Operating Manual

Functionsusedfor recording/playback,etc.
34
[] • You can set [DIGITAL ZOOM] if you want to
zoom to it level greater than l0 x (p.56),
To use the flash ...................... []
Press {_ If lash) [] repeatedly to select tile
setting.
No indicator displayed: Aut<mmtically
flashes when there is insutficienl
ambient light.
;
,_ (Forced llash): Always uses tile
tlash regardless at tile surrounding
brighmess.
@ (Itoflash): Recordswithout f lash.
% []
TOuse zoom.......................
[_[_
Move the power zoom lever [] slightly, for
a slower zoom. Move it further for a faster
ZOOII].
Wider range of
view: (Wide)
Close view:
(Telephoto)
• Be camfid not to renlove your finger suddenly
fl'om tile power zoom lever _. If you do so, the
sound of the lever moving may be recorded.
• Nail cannot
change
tile zoonl
speed
with the zoonl
buttons _ on tile LCD fianle.
• Tile minimum distance required between your
camcorder and the subject to get a sharp lbcus is
about 1 cm (about 1/2 inch) lor wide angle and
about 80 cm (about 2 5/8 feet) lot telephoto.
• Tile rccomnlended distance to tile subject when
using the built-in flash is 0.3 to 2.7 m ( 1 to 9 teet ).
• Remove any dusl fiom the surlacc of the flash
lamp belbrc using iL Flash eflecl may be impaired
if heat discoloration or dust obscures the lamp.
• The flash charge lamp flickers when chalging tile
flash, and remains lit when the battery charge is
complete.
• If you use the flash ill bright places such as when
shooting a backlil sutziect, the flash may not be
effective.
• The flash does not work when attaching the
conversion lens (optional) or filter (opflonal).
• You can change lhe brighlness of lhe flash by
setting [FLASH LEVELI. or you can prevent the
redeye by selling [REDEYE REDUCI (p.54).
Torecord in darkplaces(NightShot)
.......................................... ]
Set the NIGHTSHOT switch [] to ON. ( []
and ["NIGHTSHOT"] appear.)
• To record an image brighter, use Super NightShot
function (p.55). To record all image brighter ill
diln light, use Color Slow Shutter fimction (p.55).
• The NightShot and Super NightShol use infiared
light. Therelore, do not cover the infiared port
with your fingers or other objects.
• Remove tile conversion lens/optional).
• Adjust the locus manually ( [FOCUS I.p.54 ) when
it is hard to locus automatically.
• Do not use these functions in bright places. This
nlay cause a nla]l/lncflon.