Sony Handycam DCR-SR100 Operating Manual page 54

54
Automatically activates the electrottic
shutter tu adjust tile shutter speed whett
recurding in bright conditious if you set it to
ION]/the default setting).
Yuu can select and adjust the focal poinl to
aim it at a sut!jecl not located in the center uf
Ihe screen.
SPOTFOCUS STB¥ _ ]
(!) Tuuch the subject on the screen.
_. appears.
@ Tuuch [END].
To ac!iust the fucus automatically, touch
[AUTOI-+[ENDI
iu step
@.
• If you set [SPOT FOCUSI, [FOCUSI is
autonmtically set lo [MANUALI.
• The seuing returns 1o [AUTOI after you remove
tile power source ft)r lnore l]lan five minutes,
Yuu can at[just the focus manually. Select this
when you want Io fucus un a certain sut!jecl
intentionally.
(!) Tuuch [MANUAL].
appears.
@ Tuuch _ (fi)cusing on close sul_jects)/
[7_] (focusing on distant su/!jects) to
sharpen the focus.
appears when Ihe focus cannot be
ac[iusted any closer, and _ al)i_ears when
the fi)cus cannot be ac!justed fimher ax_ay.
@ Tuuch [72.
To at[just the fucus atttomatically, touch
[AUTO]--+[_ in step @.
• It is easier to ft)cus on the subject by moving the
power zoom level" towards T (telephoto) to a(liusl
ll_e lticus, titan towards W (wide angle) to adjust
lhe/oonl till"
recording,
When you wanl to record
a subject at close range, lno'_'e the power ZOOII/
lever to W (wide angle), then adjust the locus.
• The nfinimum distance required belween your
camcorder and the subject to get a sharp locus is
about 1 cm (about 1/2 inch) for wide angle *rod
aboul 80 cm (about 2 5/8 feel) tk)r telephoto.
• The selling returns to [AUTO] alter you remove
lhe power SOUl_2e |()r more than live nlinules,
You can set this function when you use the
built-in flash or an external flash/uptional)
that is compatible with your camcorder.
N FLASHLEVEL
HIGH(:_÷)
Makes the flash level higher.
_. NORMAL ( ,_)
LOW(_-)
Makes the flash level lo',_ er.
• The setting returns m [NORMALI *,tier you
remove Ihe power source for nlor_2 lhan
live
nlinllleS,
N REDEYE REDUC
You can prevent redeye by activating the flash
befure recording.
Set [REDEYE REDUC] to ION],
then press
t_ (flash) 1p.34) repeatedly tu select a setting.
0
(Auto redeye reduction): Pre-flashes
to
reduce redeyc bcl_)re the flash automaticall 3
flashes when there is insufficient ambient
light.
1
0 _ (Forced redeye reduction): Always
uses the flash and the rcdcyc reducing pro-
flash.
@ (Nollash): Recordswithoutflash.
• The mdeye reduction nlay not produce lfte desired
eticcl due 1o individual differences and other
conditions.