Sony Handycam HDR-UX10 Operating Manual page 7

*You c an use " Memory Slick PRO Duo"
whether Mark2 isindicated or n ot.
•See p age 33 liar t he recordable time o fa
"Mmuory Stick P RO Duo."
"Memory Stick PRO Duo" / "Memory Stick
PRO-HG Duo"
(This size can be used with your
camcorder.)
"Memory Stick"
(You cannot use it in your camcorder.)
• "Memo U Stick PRO Duo" attd "Memo U
Stick PRO-HG Duo" are both referred to as
"Memo U Stick PRO Duo" in this manuah
• You cannot use any type of memory card
other than those mentioned above.
• "Memory Stick PRO Duo" can be used
only with "Memory Stick PRO"
compatible equipment.
• Do not attach a label or the like on a
"Mmnory Stick PRO Duo" or a Memory
Stick Duo Adaptor.
• Wlmn using a "Memory Stick PRO Duo"
with "Mmnory Stick" compatible
equipment, insert the "Mmnory Stick
PRO Duo" into the Memory Stick Duo
Adaptor.
Using the camcorder
• Do m)t hohl the camcorder by the
following parts.
Viewfinder LCD screen
Battery
• The camcorder is not dustproofed.
dripproofed or waterproofed. See "About
handling of your camcorder" (p. 131).
• To prevent the media from being broken
or recorded images from being lost. do not
do the following when either of the
/Moviel/_ (Still) lamps (p. 251 or the
ACCESS lamp (p. 30)/access lamp
(p. 32) is lit or flashing:
to remove the batte U pack or AC
Adaptor from the camcorder.
to apply mechanical shock or vibration to
the camcorder.
to _.Liect the "Memory Stick PRO Duo."
• When connecting your camcorder to
another device with a cable, be sure to
insert the connector plug in the correct
way. Pushing the plug lk_rcibly into the
terminal will damage the terminal attd
may result in a malfunction of your
camcorder.
About menu items, LCD panel,
viewfinder,
a nd lens
• A men/i item
that is
gm>ed ()lit is not
available under the current recording or
playback conditions.
• The LCD screen attd the viewfinder are
manufactured using extremely high-
precision technology, so over 99.99c)_ of
the pixels are operati(mal for effective
use. However. there may be some tiny
black points and/or bright points (white.
red. blue. or green iracolor) that appear
constantly on the LCD screen and the
viewfinder. These points are normal
results of the manufacturing process and
do not alTcct the recording in any way.
Continued"=')
7