Camcorder; Devices - Sony Handycam HDR-UX10 Operating Manual

Dubbingmoviesto other recordingdevices
68
You can dub movies played back on your camcorder to ()tiler recording devices, such as VCRs
or DVD/HDD recorders. Connect the device in either of the lbllowing ways.
Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for
this operation (p. 22). Refer also to the instruction manuals supplied with the devices to be
connected.
Notes
• Movies recorded with HD (high definition) image quality will be dubbed with SD (standard
definition) image quality.
• Since dubbing is perlormed via an_dogdata transl_r, the image quality may deteriorate.
• To dub movies recorded with HD 01ighdefinition) image quality, instull tile application software
(supplied) on your computer (p. 105),mid copy tile images to a disc in tile conlputer.
AN Remote connector
t,N .....
,i ® ÷/Wb+te
................ "%,i SV,DEO V,DEO
Devices with an S VIDEO
jack
_-,. : Video/Signal flow
[] A/V connecting cable (supplied)
Connect to the input jack of the other
device.
[] A/V connecting cable with S
VIDEO (optional)
When connecting to :mother device via
the S VIDEO.jack, by using an A/V
connecting cable with an S VIDEO
cable (optional). higher quality movies
can be produced than with an A/V
connecting cable. Connect the white and
red plug (lefl/right audio) and the S
VIDEO plug (S VIDEO channel) of the
A/V connecting cable with an S VIDEO
cable (optional). The yellow plug
connection is not necessary. S VIDEO
connection only will not output attdio.
® @
AUDIO
@ @ @
VIDEO AUDIO
Devices without an
VCRs or DVD/HDD S VIDEO jack
recorders
O Notes
• You clumotdub to other recording dexices
connected with an HDMI cable.
• To hide the screen indicators
(such as
+tcounter
etc.) on
the screen of the monitor device
connected, touch _" (HOME) --+
_(SETTINGS) ++4[OUTPUT SETTINGS]
++4[DISP OUTPUTI ++4[LCDPANELI (tile
del_lUft +tting) (p. 95).
• To record tile date/tinle and camera settings
data, display Illenl on tile screen (p. 92).
• When
you are connecting your
camcorder lo a
monaural device, connect the yellow plug of the
A/V connecting cable to the video inputjack,
and the red (right channel) or tile white (left
channel)
plug to tile audio
input
jack on tile
device.