Sony Handycam HDR-UX10 Operating Manual page 23

O Notes
• Disconnect tim AC Adaptor hon_ tile DC IN
jack holding both the camcorder and tile DC
plug.
To removethe battery pack
(_) Slide tile POWER switch to OFF
(CHG).
(_) Press and hold the BATT (battery
release) button and remove the battery
pack in the direction of the arrow.
BATT (battery release) button
0
Notes
• When yol/relno_,e the battery pack or
disconnect lhe AC AdaploL make sure thai tile
!Movie) lamp/_ (Still) lamp lP. 25)/
ACCESS lamp (p. 30)/access lamp (p. 32) is
turned off.
• When sloring the bauery pack. lhlly discharge
the battc W pack belorc storing it lot an extended
period (see page ]31 lot tile delails of storage).
To usea powersource from a wall
outlet(wall socket)
Make the same contlectiolls as _o/t do x.,, l ien
charging the battery pack. The battery pack
will not lose its charge in this case.
To checkthe remaining battery
(BatteryInfo)
Set the POWER switch to OFF (CH(-;),then
press DISP/BATT INFO.
DISP
BATT INFO
After a while, the approximate recordable
time and battery information appear %r
about 7 seconds. You can view the battery
information for up to 20 seconds by
pressing DISP/BATT INFO again while the
information is displayed.
Remaining battery (approx.)
BATTERY INFO_ ]
REC TIMe AVAILABLe
LCD SCREEN: 6O rain
I ...................... I
--!
Recording capacity (approx./
Chargingtime
Approximate time (rain.) required when
you fidly charge a fully discharged battery
pack.
ry
NP-FH50 135
NP-FH60 (supplied) 135
NP-FH70 170
NP-FH 100 390
Available recording time
Approximate time (rain.) a_ ailable when
you use a fully charged battery pack.
"HD" stands lor high definition image qualily,
and "SD" stands lor slandard image quality.
m
g
g.
Continued._
23