Sony CMT-DV2D Operating Instructions Manual page 9

Plug type ®
AM loop antenna
Extend the FM lead antenna horizontally
Plug type @
AM loop antenna
(For other models)
Connect the video input jack of your TV
to the VIDEO OUT jack with the video
cable (supplied)*.
i.
* except for European
and Russian medels
When using a TV
Turn on the TV and select the videe input se that yeu
can vie_ the pictures frem this system.
When connecting a video deck
Cenncct the TV and the _idee deck using video and
audie cerds (net supplied) as sh()x_n belew.
Extend the FM lead North American model:
antenna horizontally Connect white side.
Other models:
Connect brown side.
Note
Keci_the antennas a_,ay from the speaker cerds.
[] (For European and Russian models)
Connect the _ INPUT jack of your TV
to the _ LINE-TV jack with the SCART
cord (not supplied).
When you connect using tire SCART cord,
check that the TV conlbmls
tn RGB signals.
If the TV conlorms to RGB signals, change
the input mode of the TV to RGB signals.
Refer to the operating instructions supplied
with the TV to be connected.
Video deck System
Do not connect
directly.
lfyeu connect a video deck between Ibis ',)'stem and the
TV, you may experience video leakage when watching
the vide() signal from lifts system. Do net cenncct a
video deck belween this system and the TV.
Note
De net Dlacc the TV en this system.
[] For models with a voltage selector, set
the VOLTAGE SELECTOR to the local
power line voltage.
Depending on the model, the VOLTAGE
SELECTOR may differ.
111c_1_0v
220-240V
continued_
gsB