Sony CMT-DV2D Operating Instructions Manual page 29

To record a CD by specifying
track order
You can record only your _vorite CD tracks
using Progrmn Play. Between steps 3 and 4.
perform steps 3 to 6 of "Creating your own
program" (page 16).
To stop recording
Press •.
Notes
• CD Synchro Recording is not available with DVD,
VIDEO CD, MP3 audio tracks and JPEG imlge files.
• You cannot listen to other sources while recording.
• If the play mode is set to Repeat Play or Shuffle Play,
it automatically switches to Normal Play ill step 4.
• The sound effect automatically switches to "FLAT"
in step 4.
-- Manual Recording
You can record just the porlions you like from a
disc IDVD, V1DEO CD, CD and MP3) or radio
program
OI1 a
tape.
You
call itlso
record [FoIn connecled
components (see "Hooking up optional
components" on page 37).
Use buttons on tile unit for the operation.
1
Load a recordabletape.
A
Z Press one of the following buttons to
I
select the desired source to record. "0
• DVD Dm-II: To record from Ihis
system's CD/DVD player. Press • twice m_
lo slop playback. "_
• TUNER/BAND: To record lrom tiffs I
systems Itlner.
O
• TV: To record from tile optional 0
component connected to TV 1N L/R
jacks.
3 Press • REC PAUSE/START.
The lape deck stands by for recording.
"REC" flashes.
Press • REC PAUSE/START, then start
playing the desired source to record.
Recording starts.
To stop recording
Press •.
Notes
• You cannot listen to other sources while recording.
• If no sound is being recorded when recording from a
DVD, set"Dolby Digital" or"DTS" to PCM" under
'AV" in the Setup Display.
• The sound effect automatically switches to "FLAT"
in step 3.
Tip
For recording from the tuner:
If noise is heard while recording from the tuner, move
the respective antenna to reduce the noise.
2gGB