Sony CMT-DV2D Operating Instructions Manual page 28

1
Press _-- PUSH OPEN on the unit.
2 Load a recorded/recordabletape into
the cassette holder.
With the side _H,,,,,,,,,,_
you want to
play/record
facing forward.
You can use TYPE 1 (normal) tape.
1 Load atape.
2 Press TAPE I_-.
Other operations
To Do this
Stop play PressI.
Fast-forward or Press_ or I_.
rewind
Switch to TAPE Press TAPE P"_.
function from Playback starts automatically
another source when a tape is loaded.
Cut the sound Press MUTING.
Press MUTING again or
VOLUME + to restore sound.
Remove a tape
Press A PUSH OPEN on the unit
in stop mode.
-- CD-TAPE Synchro Recording
You can record a whole CD on a tape.
You can use TYPE 1 (eorrnal) tape.
Use buttons on the unit l\)r the operation.
1 Load a recordable tape.
Press DVD IP_II and load a disc you
want to record.
2
3
4
Press • twice to cancel the Resume
Play.
Press CD SYNC.
The tape deck stands hy [\w recording.
"REC" flashes.
Press • REC PAUSE/START.
Recording starts.
Tips
• If the ta?e reaches the end of the front side hefore
completing the recording, the tape stops
automatically and the CD/DVD player enters
Resume Play mode.
• To continue the recording on the reverse side, press
• twice to first cancel the Resume Play, qiect and
reload the tlpe, then perform steps 1 and 2 of "To
perform Synchro Recording from a desired track"
(page 28). You can then continue Synchro Recording
from the desired track.
To perform Synchro Recording
from a desired track
You can select the first track in Synchro
Recording.
1
After performing steps 1 to 4, press _ or
repeatedly to select the desired track
number.
2 Press • REC PAUSE/START while the
selected track number is flashing.
Recording starts.
28 GB