Sony CMT-DV2D Operating Instructions Manual page 13

To
Locate a point
quickly in fast
R)n_ard or fast
reverse
(Lock Search)
(Except R)r
MP3/JPEG) 2)
Play all tracks Press PLAY MODE repeatedly in
on the disc in stop mode until "SHUF"appears in
random order the display, then press DVD _ (or
/Shuflle DVD D,,_II| on the unit/.
Play) :_)
Watch frame During play, press SLOW |_-. Each
by flame time you press the button, the
(Slow-motion playback speed changes.
play) To return to Normal Play, press
IDVD/VIDEO DVD _ Ior DVD _11 on the
CD only) I/2/ unit).
Rotate the Press _ or ,,,,1_.
current image Each time you press ,,,,1_, t he image
QPEG only) turns clockwise by 90".
Each time you press <1,,-, t he image
turns counterclockx_ ise by 90°.
Switch to Press DV D _ (or DVD I,,,4 | on the
DVD function unit) (Automatic Source selection).
from another Playback starts automatically when a
source disc is loaded.
Cut the sound Press MUTING.
Press MUTING again or VOLUME +
tO restore sound.
Remove a disc Press A on the unit.
Do this
Press _ or _ during play.
Each time you press the button
searching speed changes.
To return to Normal Play, press
DVD _ (or DVD _ll on the
unit).
1}There may be some disturbance ill Ihe video image.
- For DVDs and VIDEO ( Ds, no sound is oulput.
"nYou cannot perform Shuffle Play on DVDs and
VIDEO CDs with PBC function.
Notes
• Depending on the DVD or VIDEO C[), some
operations may be restricted.
• Maximum number of albums on a disc: 90 (The
maximum number of MP3 audio tracks or JPEG
image files that can be contained on a disc is 999.)
However, when a large munber of non-MP3/JPEG
files are presenL the maximum number of albums,
tracks and files may decrease.
• Playback is possible up to 15 levels.
• The system supports MP3 audio tracks recorded with
a bit rate of 32 to 320 kbps and a sampling frequency
of 32144.1148 kHz for MPEG 1Audio Layer-3.
• All album that does not include an MP3 audio track
or JPEG image file is skipped.
• If you put the extension ".MP3" to data not in MP3
lk)rmat,the system cannot recognize the data
properly and will generate a loud noise which could
damage your speaker system.
• The following discs take a longer time to start
playback.
a disc recorded with complicated tree structure.
a disc recorded in Multi Session.
a disc to which data can be added lnon-finalized
disc).
• Some CD-Rs or CD-RWs cannot be played on this
system depending on file R)rmat.
Tip
When playing the data disc contained MP3 audio
tracks and JPEG image files, set "Data CD Priority"
(page 22).
Resuming playback from the
point you stopped the disc
-- Resume Play
This system memorizes the point where you
stopped the disc so you can resume from that
point.
1
While playing a disc, press • to stop
playback.
"RESUME" appears in the display. If
"RESUME" does not appear, Resume Play
is not available.
2 Press DVD I_- (or DVD I_-|| on the unit).
The player starts playback from the point
you stopped the disc in step 1.
<
ill
O
O
_e
6o
ill
fi3
I
"o
continued
13GB