Table of Contents
Advertisement
SPECIAL
PLAYBACK
• Be sure to check that the POWER and the VCR/TV
indicators are both on.
• Turn on the TV and set the TV to channel
3 or 4. Now set the CH3/CH4
switch on
the back ofthe VCR to match the channel
l_ackof
selected on the TV.
:heVCRI
The VCR has the auto repeat function that allows you
to repeat a tape indefinitely without touching the PLAY
button.
Make sure to insert a prerecorded
tape.
I
Select main menu
Press the MENU button until the
main menu appears.
2
Select"AUTO
REPEAT"
Press the PLAY/&
or STOP/V
I
.MINO.
I
it.
ALbTO REFF_AT
pK_R_
_EL_r
CH_,k_ELS_T UP
CROCKs_r
O_NGUAG£S£LSCT
Auto $_TELUTE tl_
button to point to "AUTO REPEAT".
3
Begin Auto repeat playback
Pressthe F.FWD/I_ buttonso that [ON] will appearnext
to "AUTO REPEAT" on the TV screen.
When in Stop mode, Repeat playback mode will start
automatically.
If the on-screen
menu still remains,
press
the RE-
SET/EXIT button to exit the menu.
• Once you select the Auto Repeat mode, it stays in
effect even after you tam off the VCR.
• The COUNTER MEMORY button does not function
if the Auto Repeat mode is set to [ON]. In this case,
set the Auto Repeat mode to [OFF].
• To stop playback, press the STOP button.
TO EXIT THE A UTO REPEA T MODE
Repeat steps [1] to [2], and press the EFWD/ID,. button.
[OFF] will then appear ou the menu. Then, press the
RESET/EXIT
button to return to TV mode.
Power failure: If there is a power failure for more than
30 seconds, Auto Repeat Playback will
go to off.
This function enables you to select the picture quality of
a tape.
• This selection
must be done during playback.
1 Insert a tape into VCR
Begin playback.
2 Select main menu
-.E.v.
AUl_ REPOT
IOFF3
Press the MENU button until the
o,,.._,_ o,
ete_x
StT
main menu appears.
_e._,=,_,
AUTO S,_TEB.IrEU_
3
select"PICTU RE SELECT"
Press the PLAY/& or STOP/V button to point to "PIC-
TURE SELECT".
4 Selectyour desired mode
Press the EFWD/I_.
button
until your desired mode
(NORMAL,
SOFT or SHARP)
appears
on the TV
screen,
• Once you select the Picture Select mode. it stays in
effect even after you turn off the VCR.
• To stop playback, press the STOP button.
Power failure: If there is a power failure for more than
30. seconds,
Picture Select will go to
NORMAL.
-19-
EN
9J27
H58M0
Advertisement
Table of Contents
