Table of Contents
Advertisement
PLAYBACK
• Be sure to check that the POWER and the VCR/TV
indicators are both on.
• Turn on the TV and set the TV to channel
3 or 4. Now set the CH3/CH4 switch on [eNteR41
the back of the VCR to match the channel
selected on the TV.
[Back ot
the VCR]
1 Insert a prerecorded tape
Counter mode appears at 0:00:00 on the TV screen. If
the erase-protection
tab has been removed, the VCR will
start playback automatically.
2 To begin playback
Press the PLAY button.
NOTE:
If any menu is activated on the TV screen, the
PLAY button does not function. Press the RE-
SET/EXIT
button
to clear the menu. Then,
press the PLAY button.
lf a tape is already
in the VCR with power
off
2A_
Using button on the VCR
Just press the PLAY button on the VCR. Power will
automatically
turn on and playback will start. (Direct
Button Operation)
2B)
Using button on the remote control
Press the POWER button to turn on the VCR, and
then press the PLAY button on the remote control.
3
To stop playback
Press the STOP button.
This feature is very useful in finding or skipping over a
particular scene on a tape. In this mode, the sound will
be muted.
1) You may view a video tape at a high speed in either
a forward or reverse direction by pressing the F.FWD
or REW(IND) button. (in the SP / LP / SLP modes)
, 2) Press it again and the VCR will now search in super
high speed. (in the LP / SLP modes only)
3) Press the PLAY button to return to normal speed.
You can view a still picture on the TV screen during
playback (the Still mode). Press the PAUSE/STILL
but-
ton during playback. Press the PLAY button to return to
playback.
• You can advance the picture by one frame at a time
by pressing the PAUSE/STILL
button during the still
mode.
• If it is left in the Still mode for more than five min-
utes, the VCR will automatically
switch to the Stop
mode.
-17-
EN
9J27
H58M0
Advertisement
Table of Contents
