Table of Contents
Advertisement
RECORDING
• Please
refer to the connection
you are using,
through pages 10, 11, or 12 on "ANTENNA/CA-
BLE CONNECTIONS"
before continuing.
• Be sure to check that the POWER and the VCR/TV
indicators are both on.
• Turn on the TV and set the TV to channel
3 or 4. Now set the CH3/CH4 switch on
the back of the VCR to match the channel
[sackof
selected on the TV.
the vcr_]
• Insert a cassette tape with its erase prevention tab in
place. (If necessary, rewind or fast forward the tape
to the point at which you want to begin recording.)
1 Selectthechanneltoberecorded
remote
control
or the CHAN-
NEL • or A button.
NOTE:
If yon have a cable box or satellite box con-
nected to this VCR, please refer to "AN-
TENNA/CABLE
CONNECTIONS" on pages
11 and 12 before proceeding to the next step.
Press the TAPE SPEED
button
on the VCR to select the desired
tape speed (SP/SLP).
3
Begin recording
(.Ec
Press the RECORD
button. The
RECORD indicator on the VCR
comes on.
NOTE:
If any menu is activated on the TV screen, the
RECORD button on the remote control does not
function. Press the RESET/EXIT button to clear
the menu. Then, press the RECORD button.
4
Stop recording
Press the STOP button when recording is completed,
Press the PAUSE/STILL
button
['_'_
l
to temporarily
stop recording.
Press the PAUSE/STILL
or RE-
CORD button to resume record-
ing.
NOTE:
When the VCR is in the Pause mode, you may
view the pause time remaining with • marks
on the TV screen. Each • mark represents one
minute. After five minutes, the VCR will auto-
matically switch to the Stop mode to prevent
tape damage. When there is I minute remain-
ing, one • wilt flash.
You can record one program while viewing another. To
start recording, follow steps [ 1] to [3] under "VIEWING
AND RECORDING
THE SAME PROGRAM".
To select the channel you want to view at the TV, follow
the steps below.
NOTE: If you have a cable box or satenite box con-
nected to this VCR, please refer to "AN-
TENNA/CABLE CONNECTIONS" on pages
11 and 12 before proceeding to the next step.
4
Select the TV mode
Press the VCR/TV button sothat the VCR/TV indicator
on the VCR disappears,
J
5 Select the channel on the TV
Set the TV to the channel you want to watch.
1) Press the VCR/TV button so that the VCR/TV indi-
cator on the VCR comes on.
2) Turn on the TV and set the TV to channel
3 or 4. Now set the CH3/CH4 switch on
the back of tbe VCR to match the channel
[Back or
selected on the TV.
theVCRI
- 22 -
EN
9J27
H58M0
Advertisement
Table of Contents
