Gefen EXT-DPKVM-841 User Manual page 22

#SIPADD Command
The #SIPADD command specifi es a new IP address. Dot-decimal notation must
be used when specifying the IP address. A reboot is required after the new IP
address is set.
Syntax:
#sipadd param1.param2.param3.param4
Parameters:
param1
param2
param3
param4
Example:
#sipadd 192.168.2.240
#SNETMASK Command
The #SNETMASK command specifi es a new net mask. Dot-decimal notation
must be used when specifying the IP address. A reboot is required after the new
IP address is set.
Syntax:
#snetmask param1.param2.param3.param4
Parameters:
param1
param2
param3
param4
Example:
#snetmask 255.255.255.0
RS-232 COMMANDS
IP address
IP address
IP address
IP address
IP address
IP address
IP address
IP address
19
[0 - 255]
[0 - 255]
[0 - 255]
[0 - 255]
[0 - 255]
[0 - 255]
[0 - 255]
[0 - 255]